PO-V5 24/12V 8A voltage converter

The PO-V5 24/12V 8A converter is intended for supplying receivers with a power consumption up to 8A with a voltage of 24V.
Application is found wherever a stable voltage is needed than the voltage provided by the power source. It is perfect for supplying devices from buffered systems with 24V rated voltage. (e.g. with MB500 buffering modules)
The basic advantages of the device are - high efficiency reaching up to 91%, small dimensions, low level of current voltage, low price and the use of structural elements and solutions based on the latest achievements in the field of impulse energy processing.
The output power is sufficient to power most devices, if you need to obtain more power, it is possible to connect converters at the same time, maintaining the compatibility of the outputs. Thanks to the heat sink used in the form of a housing, the air circulation for ambient temperatures up to 45 degrees Celsius is unnecessary. At a higher ambient temperature and rated power, it is recommended to force air circulation.
The system has an overload limit in the form of thermal protection for the temperature of key elements of the system equal to 80 °C.
Short-circuit protection reduces the output voltage and re-administration of the rated voltage after the short circuit disappears.

Characteristics:

• Wide range of input voltage 16 ÷ 32 V
• High efficiency> 94% for VIN = 28V
• Low levels of exit voltage heart rate 30 mv p-p
• 80 ° C thermal protection
• Electronic short -circuit protection - maintenance -free
• OCP implemented on the Plus side
• OVP on the output side with a fuse
• Small dimensions
• Full SMD cast
• Compliance with CE standards, 97/24/WE-C08, EN1175

Application:

• Telecommunication
• Buffed systems
• Alarms
• Intercourse
• Telemetry applications
• Lighting
• Monitoring
• Poe
• Automation
• Fiber optic networks
• Wi-Fi networks
• Access control systems

Technical data:

• Manufacturer: Cabledia
• Dimensions: 75 x 64 x 22 mm
• Weight: 0.07 kg
• Input voltage: 16 ÷ 32 V DC
• Nominal input voltage: 24 V DC
• Output voltage: 12 V DC
• Output current: 7 ÷ 9 A
• Nominal output current: 8 A
• Working temperature: from -30 to +80 ° C
• Output tension: 15 ÷ 30 mv
• Working frequency: 250 ÷ 350 kHz
• Current consumption without load: nominally: 30 mA, maximum: 40 mA
• Thermal protection: 80 ° C (75 ÷ 82 ° C)
• Resistance to input voltage interference: nominal: 37/20 V/s (min.: 35/10 V/s, max.: 40/60 V/S)